B) Duct Sensor - For single point monitoring. It is available with
various probe lengths and enclosures to fit any application.
D) Duct Average Sensor - Incorporates
numerous sensors inside a copper tube. It acts as a single sensor,
averaging any temperature change across the sensors.
F) & FX) OSA Sensor - Comes in an aluminum LB or ABS enclosure. Both models c/w ½" NPT fitting for connection to conduit. It incorporates a sun/wind shield to protect the sensor.
The TE Series Temperature sensors offer a choice of precision platinum RTD's, IC, or NTC thermistor sensors which can be interfaced with a computerized monitoring or control system.
The sensors are available in different housings, with various configurations and options for duct, immersion, duct averaging, remote strap-on and outside air applications.
The single point sensors are encapsulated in a 6.35 mm (0.25") OD 304 stainless steel probe. All probes are constructed to provide good heat transfer and fast response. The averaging sensors are available in both plenum rated cable or with a copper probe.
|
|
C) Immersion Sensor - Comes in two
configurations. It has either spring loaded or non-spring loaded
probes and has a 1/2" NPT fitting to be mounted into a thermowell.
It is available in various lengths and enclosures styles.
E) Strap-on Sensor - Is a stainless steel probe and is used in remote applications where an immersion sensor can not be installed.
FD) Flex-Duct Sensor -Is made of flexible plenum rated cable which incorporates numerous sensors along the assembly. It acts as a single sensor averaging any temperature change across the sensors.
The TE500 transmitter option comes with the 1000 ohm platinum sensor as standard and provides either 4-20mA, 0-5 Vdc or 0-10 Vdc output over a selected range. It is powered by either 24 Vac or Vdc. A 100 ohm platinum sensor transmitter is optional.
Transmitter
General Specifications:
Supply Voltage:
Output:
Accuracy:
Operating Temp.:
OSA
Operating Temp.:
Calibration: |
24 Vdc/Vac
4-20mA, 0-5 or 0-10 Vdc
?.1% of span
0°C-70°C (32°F-158°F)
-40°C-85°C (-40°F-185°F)
In compliance
with
ANSI/NCSL 2540-11994
|
|