| Enclosure |
Executive (AE) 71mm W x 119mm H x 32mm D(2.8" x 4.7" x 1.25")
|
| Power Supply |
5 Vdc +/- 5% ( must be regulated) or 10-35 Vdc / 24 Vac +/- 20% (Vac is
half wave rectified)
|
| Sensors
|
Thermistors or RTD's (see ordering information)
|
| Display |
Displays room temperature with 0.1 resolution for 0-35C or 32-95F
Celsius or Fahrenheit (specified at time of ordering)
Setpoint displays for two seconds when button is pressed
Accuracy +/- 0.2° plus sensor accuracy
|
Setpoint
(Resistive Output) |
Dual (2) momentary push button controlled
Output is always with respect to power supply common
Range values are specific to application (see ordering information)
Setpoint can be programmed to have a reset time value (1,2 or 3 hours)
|
| Override |
Optional feature, one momentary push button
Switch activation results in a closed contact output
Optional wiring as separate two wire output, in parallel with sensor, in parallel with setpoint or with respect to power supply common
|
| LED |
Optional LED (red,yellow or green)
Specify as a two wire output or as a one wire output with cathode connected to common or an anode connected to +5Vdc
|