 |
|
|
|
| MODEL |
Product Description |
| TE200 |
Sensor assembly |
| |
CODE |
Style |
| AP |
All purpose |
| B |
Duct mount |
| BB |
Duct probe with mounting bracket only |
| C |
Immersion |
| D |
Duct average (copper) |
| DC |
Duct average continuous (copper) - Only Available in PT1000 |
| E |
Strap-on- 50 mm(2") probe assembly |
| ES |
Strap-on-Assembly clamps around pipe with copper plate c/w 254mm (10")stainless clamp |
| F |
O.S.A |
| FD |
Duct average (flexible plenum rated cable) |
| FE |
O.S.A (Round ABS enclosure) |
| FL |
Flying Lead |
| FX |
O.S.A (ABS enclosure w/ hinged cover) |
| G |
Glass |
| H |
Stack |
| HC |
Sensor with mounting clip |
| |
CODE |
Enclosure N/A for AP, BB, F, FE, FL, FX, H, or HC |
CODE |
Flex Duct Only (FD) |
| - |
ABS enclosure, standard (no code
required, leave blank) |
A |
Lead only, no box |
| M |
Metal utility box |
B |
ABS enclosure |
|
|
C |
Aluminum weatherproof |
| W |
Aluminum weatherproof box |
D |
Metal utility box |
| E |
Round ABS, w/gasketed cover |
E |
Round ABS, w/gasketed cover
|
| |
| CODE |
Sensor |
| 2 |
PT100-100 ohm Platinum, IEC 751,
385 Alpha, thin film |
| 4 |
PT100-100 ohm Platinum, IEC 751,
385 Alpha, Wire-wound ceramic *(see below) |
| 5 |
1801 ohm, NTC Thermistor,
±0.2°C |
| 6 |
3000 ohm, NTC Thermistor,
±0.2°C |
| 7 |
10,000 ohm, type 3, NTC Thermistor,
±0.2°C |
| 8 |
2.252 K ohm, NTC Thermistor,
±0.2°C |
| 9 |
100,000 ohm, NTC Thermistor,
±0.2°C |
| 11 |
LM334 IC, 1.0uA/°C (N/A in AP, BB, D, DC, F, FD, H or HC configurations)
|
| 12 |
PT1000-1000 ohm Platinum, IEC 751,
385 Alpha, thin film |
| 13 |
1000 ohm Nickel |
| 14 |
10,000 ohm, Type 3, NTC Thermistor, ±0.2°C c/w 11K shunt resistor |
| 15 |
PT3000 PTC Platinum, ±0.2ºC |
| 20 |
20,000 ohm, NTC Thermistor,
±0.2°C |
| 21 |
LM335 IC, 10mv/°C (N/A in AP, BB, D, DC, F, FD, H or HC configurations)
|
| 24 |
10,000 ohm, type 2, NTC Thermistor,
±0.2°C |
| |
CODE |
Probe Length
|
CODE |
Copper Avg. (D)
|
CODE |
Flex AVG. (FD)
|
| A |
50 mm (2") |
G |
1800mm
(6')* |
A |
1800mm
(6') |
| B |
100 mm (4") |
H |
3600mm
(12') |
B |
3600mm
(12') |
| C |
150 mm (6") |
I |
6100mm
(20')* |
C |
6100mm
(20') |
| D |
200 mm (8") |
J |
7300mm
(24') |
D |
7300mm
(24') |
| E |
300 mm (12") |
| F |
450 mm (18") |
| |
CODE |
Probe Material (not required for
ES, F, FD, G, HC) |
| 2 |
Stainless steel |
| 3 |
Copper (rigid duct average only) |
| |
CODE |
Fitting (only required for
immersion "C) |
| A |
Spring loaded 1/2" NPT |
| E |
Non-spring loaded 1/2" NPT |
| TE200 |
D |
- |
7 |
I |
3 |
- |
*must use for high temp. applications over 400°C
(752°F)
* not available in DC
Example: Duct Average, 10K Thermistor, 20' Copper.
Greystone Energy
Systems Inc., reserves the right to make design modifications without
prior notice.
 
        
|