Liquid Pressure Transducers WP Series

Excellent long-term stability and high accuracy Backlit LCD for display of differential or gauge     pressure Jumper selectable LCD backlight for low power     consumption applications Four switch selectable pressure ranges Jumper selectable output types, 4-20 mA, 0-5     and 0-10 Vdc NEMA 4X (IP65) enclosure Pushbutton and remote zeroing terminal Uni-directional or bi-directional pressure     range selection switch High / low port swap switch to solve incorrect     plumbing for differential Normal or slow surge damping switch to prevent     false alarms and reduce noise Output polarity reverse switch

Gauge pressure tranmistter Wet/Wet differential pressure transmitter c/w LCD

The Wet-Wet pressure transmitter is designed with dual sensors that enable it to accept high differential pressures in the ranges of 5PSI to 500PSI. All models can handle overload pressure 2X the maximum full scale range and burst pressure is 5X the maximum full scale range.

The gage pressure transmitter is designed with a single sensor that enables it to accept high pressures in the ranges of 5PSI to 500PSI. All models can handle overload pressure 2X the maximum full scale range and burst pressure is 5X the maximum full scale range.

Features include field selectable pressure ranges and output signal types for the most flexible applications. Typical HVAC applications include monitoring of water differential and gage pressure. The output signal is factory calibrated and temperature compensated for the highest start-up accuracy.

Ensure that the maximum individual port pressure does not exceed the maximum pressure range of the unit. For example, the maximum individual port pressure on a WPD-102 is 100 PSI. Exceeding this may damage the sensors and WILL give erroneous readings.