• True RMS-DC conversion
  • CT or PT input (jumper selectable)
  • Loop Powered
  • Reverse voltage protection
  • CSA NRTL/C approval (Canada/USA)



  • Power consumption monitoring
  • Overload detection

    The CVT-100 accepts a 0 to 5 Amp RMS current from a CT, or a 0 to 20 Volt RMS voltage from a PT, and converts it to a proportional DC current loop.




    • The CVT-100 incorporates a true RMS conversion which is corrected for all types of waveforms, and therefore can be used with a wide variety of load types: SCR, TRIAC, Inductive motors, etc.



    Power Supply 10-32 VDC
    Current Consumption: 26 mA (max.)
    Input Signal: 0-5 Amp RMS (CT) or 0-20 volt RMS (PT)
    Input Signature: 0.1 ohm (CT) 15K ohm (PT)
    Accuracy: ±1% Full Scale Output
    Operating Temperature: 0°C-70°C (32°F-158°F)
    Operating Humidity: 0-95% RH non-condensing
    H x W x D: 19 x 57 x 70 mm (0.75" x 2.25" x 2.75")
    Mounting: Snap Track (factory supplied)
    Optional Enclosures


    HomeCompanyProductsISO 9000Client CenterContact UsLocationsStandardsSite Map
    Copyright © Greystone Energy Systems Inc. 2003

    Privacy Statement